3-in-1 Monoblock Pure Water Filling Machine, 330-2250 ml
Short Description
Model No.: Hits: 29
3-in-1 Monoblock Pure Water Filling Machine Supplier: Pure Water Bottling Machine, 3-in-1 Monoblock, Gravity Filling, SUS 316L, 330-2250 ml, RoHS, SGS.
Request a quoteTags:
Key Specifications / Features
Type: Weighing-type Filling Machine.
Automatic Grade: Auto/Semi-Automatic.
Material Type: Liquid.
Filling Valve Head: Multi-Head.
Feed Cylinder Structure: Single-Room Feeding.
Dosing Device: Surface Type.
Filling Principle: Gravity Filling.
Packaging Container Lifting Structure: Pneumatic Lifting.
Structure: Rotary, Linear.
Packaging: Bottle, Barrel, Gallon, Jar, Container.
Packaging Material: Plastic.
Voltage: 220V, 380V, 400V, 415V, 460V, 3pH.
Suitable Bottle: 50-110.
Suitable Bottle Volume: 330-2250ml.
Washing Pressure: 2-3 kg/cm2.
Filling Tolerance: 2%.
Filling Valve Material: SS 316L.
Certification: CE, UL, ISO, SGS.
Specification: CE, RoHS, SGS.
Monobloc 3 in 1 pure water bottling machine
CGF series mineral water filling machine and packaging machinery is a self-developed new product by our R & D department to meet the requirement of multi-usage demands for our customers.
The water filling machine is consisted of rinsing-filling-caping all together. It can fill mineral water, pure water and distill water etc. CGF water filling machine adopts the suspension design. It allows the machine to fill different type of the bottles. It is normally used as drinking water filling machine. However, it can also be used for fill PET bottle with fruit juice and tea at high temperature by simply change the valve.
It can be connected with our others machines to form the water filling machine and packaging machinery production line.
Washer
1. The rotary wheel is a fully stainless steel welded structure.
2. The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS 304 stainless steel, this bottle clamp is hygienic and durable.
3. The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4. All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
5. The rinser is driven by driving system positioned inside machine frame via gear transmission.
6. Transfer starwheel.
7. Made of stainless steel of superior quality.
8. Equipped with bottle jam protection device.
Filler
1. Rotary wheel fully made of stainless steel SUS 304.
2. Gravity filling method.
3. Filling valves are made of SUS 316L.
4. Filling valves are reasonably structured with accurate filling.
5. Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
6. Level of cylinder is controlled with float-ball.
7. Filler is driven through gears inside the machine frame.
8. Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
Capper
1. The equipment is designed with the support of experts from school of engineering and mechanical in Shanghai Jiao Tong University, and uses the technology of Arol from Italy, most advance technology in the world, developed with the experience of asepsis filling machine. For example, I) extruding wheel (main part to control the stability when sealing), uses the technology of Arol. Kinematical and kinetic design of the wheel by experts improves the stability and credibility of the equipment. II) Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico. Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only it can set the contortion, but also it makes contortion more precise and credible, and reduces inferior.
2. Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
3. Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
4. The capper is equipped with inlet bottle detection switch.
5. Centrifugal way of cap arranging is adopted to reduce damage of caps.
6. A cap inspecting system is applied to control on-off of elevator.
Automatic Grade: Auto/Semi-Automatic.
Material Type: Liquid.
Filling Valve Head: Multi-Head.
Feed Cylinder Structure: Single-Room Feeding.
Dosing Device: Surface Type.
Filling Principle: Gravity Filling.
Packaging Container Lifting Structure: Pneumatic Lifting.
Structure: Rotary, Linear.
Packaging: Bottle, Barrel, Gallon, Jar, Container.
Packaging Material: Plastic.
Voltage: 220V, 380V, 400V, 415V, 460V, 3pH.
Suitable Bottle: 50-110.
Suitable Bottle Volume: 330-2250ml.
Washing Pressure: 2-3 kg/cm2.
Filling Tolerance: 2%.
Filling Valve Material: SS 316L.
Certification: CE, UL, ISO, SGS.
Specification: CE, RoHS, SGS.
Monobloc 3 in 1 pure water bottling machine
CGF series mineral water filling machine and packaging machinery is a self-developed new product by our R & D department to meet the requirement of multi-usage demands for our customers.
The water filling machine is consisted of rinsing-filling-caping all together. It can fill mineral water, pure water and distill water etc. CGF water filling machine adopts the suspension design. It allows the machine to fill different type of the bottles. It is normally used as drinking water filling machine. However, it can also be used for fill PET bottle with fruit juice and tea at high temperature by simply change the valve.
It can be connected with our others machines to form the water filling machine and packaging machinery production line.
Washer
1. The rotary wheel is a fully stainless steel welded structure.
2. The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS 304 stainless steel, this bottle clamp is hygienic and durable.
3. The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4. All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
5. The rinser is driven by driving system positioned inside machine frame via gear transmission.
6. Transfer starwheel.
7. Made of stainless steel of superior quality.
8. Equipped with bottle jam protection device.
Filler
1. Rotary wheel fully made of stainless steel SUS 304.
2. Gravity filling method.
3. Filling valves are made of SUS 316L.
4. Filling valves are reasonably structured with accurate filling.
5. Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
6. Level of cylinder is controlled with float-ball.
7. Filler is driven through gears inside the machine frame.
8. Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
Capper
1. The equipment is designed with the support of experts from school of engineering and mechanical in Shanghai Jiao Tong University, and uses the technology of Arol from Italy, most advance technology in the world, developed with the experience of asepsis filling machine. For example, I) extruding wheel (main part to control the stability when sealing), uses the technology of Arol. Kinematical and kinetic design of the wheel by experts improves the stability and credibility of the equipment. II) Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico. Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only it can set the contortion, but also it makes contortion more precise and credible, and reduces inferior.
2. Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
3. Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
4. The capper is equipped with inlet bottle detection switch.
5. Centrifugal way of cap arranging is adopted to reduce damage of caps.
6. A cap inspecting system is applied to control on-off of elevator.
Comment Form